Project Description

Training Octagon MMA Cage

ITEM NO: MCOT01

The Raised Metal Frame Base Training Octagon MMA Cage is a commercial grade cage for training use. This cage has been purpose built for day-in day-out use within your gym – which is a far greater amount than a competition cage.

Protective net high 180cm, stage high 30cm to 50cm, steel tube 114mm, wall thickness 2.5mm, plank thick 2.5cm plywood floor, mesa flexible layer thickness 4cm, imported EVA material.

The freestanding Training Octagon MMA Cage comes complete with a self-supporting frame that is completely padded for safety, using high grade EVA foam with an easy to clean 1000D PVC covering.

The panels on the frame is high grade of EPE foam, similar to what is used inside Judo tatami. This ensures the frame will always remain protected as this foam is high density, with A small memory.

The metal mesh is covered with PVC. After long time use is not discolored or cracked. The metal mesh is permanently attached to the frame with no zip or cable ties needed. This ensures the level of protection as the panels can then be mounted as a restrictive barrier on a raised mezzanine level. Behind each panel are a series of metal bars that give additional reinforcement to stop the mesh from sagging under heavy use.

The metal frame raised base height is 30cm to 50cm. Supported by technical framework, the metal frame raised base is very stable and strong, then covered with 2.5cm of wooden board. We also laid PE foam flooring on the wooden board. The flooring is made from 2.5cm PE foam and covered with 1000D heavy duty PVC leather, which is easy to clean, non-abrasive and non-slip.

Features:

  • Adopts traditional frame structure.
  • Heavy-duty steel post and frames give extra supports and security for ultimate in stability.
  • All steel frames or posts by powder coated anti-rust treatment for long-lasting performance.
  • Cage Panel with exclusive anti-deformation and crack vinyl coated chain link fence.
  • Top Industry Quality standard , Warranty for 5-9 years.
  • All accessories and installation instructions are included.

raised mma cagemma cage floor training
fighting cage

Our Boxing Rings,  MMA cages and Muay Thai Rings are built with all Heavy -guage structural steel, providing the strongest and safest performance.  “No Bolts” design offers perfect structural integrity and stability, making assemble very easy and fast.

The Training Octagon MMA Cage is made of below parts:

  1. Full set of powder coated Steel Frames, constructed of 8cm*10cm*2.5mm steel tube.  Each post weighs approximately 40kg.
  2. 8 sets of Chain Link Fence Cage Section (made of Crack and deform resistance steel wire, vinyl dipped anti-rust and injury protection).  Height 1.8m.
  3. 8 Corner Posts, constructed of 8cmx10cm steel tube heavy-guage steel, antirust powder coating.
  4. 8 sets of Corner Post Cushions (made of 20oz vinly, high density foam). Vinyl with foam filling and easy Velcro closure.
  5. Full set of 2.5cm thick Protection EVA Mats.
  6. 1 set of canvas Floor Cover, anti-skip. Printed your logo.
  7. Full set of 2.5cm Noise Reduction Plywood Flooring.
  8. 1 set of Hook & Loop Skirt, built of PU, many colors are available.
  9. 1 door (opens inward and outward for fighter safety). The door of the MMA Cage has heavy duty steel hinges with a solid steel locking bar.
  10. 1 ladders.
  11.  Club logos printed on the backrests and skirt.

Specifications:

-8 x Panels
-8 x Steel Posts
-30cm to  50cm Raised Metal Frame Base
-2.5cm PE Foam Flooring
-1000D Heavy Duty PVC Cover
-MMA Cage Height :180cm
-5mm PVC Coated Mesh

Available Size:

The horizontal vertical distance between two parallel metal mesh.

Size:4*4*1.8M+0.3M
Size:4.5*4.5*1.8M+0.3M
Size:5*5*1.8M+0.3M
Size:5.5*5.5*1.8M+0.4M
Size:6*6*1.8M+0.4M
Size:6.5*6.5*1.8M+0.5M
Size:7*7*1.8M+0.5M
Size:8*8*1.8M+0.5M

Or customize it to a larger size. Custom Sizes to Order. Custom colours, sizing and printing are available on our MMA Cage.

Assemble of Training Octagon MMA Cage: 3 men in 4 hours

Assembly manual is available upon request.
Floor cage – 2 men in 1 hour
Elevated Cage which adopts No Bolts structure – 3 men in 2 hours
Elevated Cage with Catwalk which adopts No Bolts structure- 3 men in 3 hours
Elevated Cage which adopts traditional structure – 3 men in 4 hours
Elevated Cage with Catwalk which adopts traditional structure- 3 men in 6 hours
Don’t expect to take it down and put it back in half an hour. Remember it is a 2-ton monster.

octagon cage structureMMA CAGE FOR SALE

Production Process of Training Octagon MMA Cage

wresting ring 4m Main frame of training boxing ring adopts Full set of Steel Frames, constructed of 8cmx10cm steel tube.

height mma cageAdopts Traditional Frame Construction.  Assemble with three men in 4 hours.

Octagon cage for fightingColumn with a combination of both sides of the frame, PU sponge layer wrapped.

MMA CAGE TRAININGCage Panel with exclusive anti-deformation and crack vinyl coated chain link fence.

raised octagon mma cageGrid: As the seine plastic coated diamond shaped network, network structure and the cage
body frame are connected as a whole, to provide more strong closed venues.

gym octagon mma cage fighting

The inner of octagonal cage is covered by soft package made of high density PVC and high density foam, prevent injury effectively.

training mma cage floorBackrest: Back protection athletes are not injured in the game. Outside is made of elastic PU, EVA and sponge inside, full in shape and comfortable to use.

professional boxing ring 5m

Flooring: Full set of 2.5cm Noise Reduction Plywood Flooring and high density padding mats,
covered with heavy-duty anti-slip canvas sheet or 22oz Vinyl sheet.mma cage octagon

All steel post and frames are packaged with Protection Bubble Wraps, accessories are in standard carton box or plywood box.

Is Training Octagon MMA Cage Easy to Assemble?

Assembly manual is available upon request.
Floor cage – 2 men in 1 hour.
Elevated Cage which adopts No Bolts structure – 3 men in 2 hours.
Elevated Cage with Catwalk which adopts No Bolts structure- 3 men in 3 hours.
Elevated Cage which adopts traditional structure – 3 men in 4 hours.
Elevated Cage with Catwalk which adopts traditional structure- 3 men in 6 hours.
Don’t expect to take it down and put it back in half an hour. Remember it is a 2-ton monster.

How is Octagon MMA Cage packaged when you ship?

Certainly we pack it to as small size as possible.

How is Octagon MMA Cage shipped?

By the cheapest means for sure, either by ocean or by truck if no sea port near you.

What are your warranties?

We promise only what we can do, here’ it is:
1. We delivery all the parts listed in our sales agreement; Anything missing, if ever happened, we ship to you for free;
2. All materials we use meet our specifications; NO thinner mat; NO thinner vinyl;NO thinner wall steel; NO thinner wood board and NO smaller size. We want you come back. You got it.
3. In 10 years, no welding joins break; no steel pipes break, no steel plates break.
4. In 5 years, all foams (on floor, rails, poles, pads) remain 90% of elasticity.
5. In 2 years, no breaks on vinyl bonding and stitches;
All warranties are valid under normal use condition.

How much is a Octagon MMA Cage?

Before we quote accurate price, we need to know:
1. Type of cage (floor cage, elevated cage, elevated cage with catwalk)
2. Cage size in meter either pole-to-pole or wall-to-wall
3. Sear port near you or delivery address
4. Printing file with printing size and colors